Non-Insulated Doors

Model Section Thickness Panel Design Ext. Steel Gauge Backer R-value* Max Width** Max Height
520 2″ Ribbed Steel 20 Gauge N/A N/A 26’2″ 20’0″
520S 2″ Minor & Deep Ribs 20 Gauge Pre-painted 30 gauge steel back cover 6.6 26’2″ 20’0″
522 2″ Flush 20 Gauge N/A 6.6** 24’2″ 24’0″
522S 2″ Flush 20 Gauge N/A 6.6** 24’2″ 24’0″
524 2″ Ribbed Steel 24 Gauge N/A N/A 24’2″ 20’0″
524V 2″ Minor & Deep Ribs 24 Gauge Polyethylene vinyl back cover 6.6 26’2″ 20’0″
524S 2″ Minor & Deep Ribs 24 Gauge Pre-painted 30 gauge steel back cover 6.6 24’2″ 20’0″
525 2″ Ribbed Steel 25 Gauge N/A N/A 20’2″ 16’0″
525V 2″ Minor & Deep Ribs 25 Gauge Polyethylene vinyl back cover 6.6 20’2″ 16’0″
525S 2″ Minor & Deep Ribs 24 Gauge Pre-painted 30 gauge steel back cover 6.6 20’2″ 16’0″
664 2 1/8″ Raised Panel Steel 24 Gauge N/A N/A 20’2″ 16’0″
664V 2 1/8″ Raised Panel 24 Gauge Polyethylene vinyl back cover 6.3 20’2″ 16’0″

*Calculated door section R-value is in accordance with DASMA TDS-163

Insulated and Non-insulated doors come with a variety of options to address your building requirements. Options below are not available on all models. See model specific literature or consult a Clopay® commercial dealer for option availability.

Design Options:

  • Windows
  • 24″x6″
  • 24″x12″
  • Full View (pre-painted white or brown or clear anodized)
  • Black frame Window with Rounded Corners

Colors:

  • White – All Models
  • Brown – All Models
  • Tan – 524, 524S, 524V
  • Gray – 524, 524S, 524V
  • Trinar White – 524, 524V, 525S
  • Desert Tan – 664, 664V
  • Hunter Green – 664, 664V
  • Sandtone – 664, 664V
  • Almond – 664, 664V

Performance Options:

  • High Cycle Springs (25K, 50K and 100K available)
  • 3″ heavy duty track (where not standard)
  • Outside keyed Security Lock
  • Double End Stiles
  • Design pressure rated (WindCode)
  • Impact Rated
  • Photo eyes, sensing edges and Operators
  • Sustainable Door Upgrade
  • Header (top) and Jamb Seals

Custom Options:

  • Mullions
  • Breakaway Sections
  • Pass Door

Model – 520/524/525

Panel Design: 2″ thick roll formed ribbed steel
Steel Gauge: 20 ga (.034″ min) – Model 520, 24 ga (.022″ min) – Model 524and 25 ga (.019 min) – Model 525 ribbed steel sections
Joint Design: Tongue and groove
Thickness/Insulation: No insulation
Hardware: 14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs
Colors: Pre-painted white or brown (520/525)
Pre-painted white, brown, tan or gray (524)
Limited Warranty: 10-year finish against rust / one-year material & workmanship

Model 520S

Panel Design: 2″ thick roll formed stucco embossed ribbed steel
Steel Gauge: 20 gauge (.034″ min) for maximum dent resistance
Joint Design: Tongue and groove
Thickness /Insulation 1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover
Thermal Conductivity R-Value 6.6*
Paint System: 3-stage paint process delivers maintenance free finish that resists rust perforation
Colors Pre-painted white or brown
Limited Warranty: 10-year paint / one-year material & workmanship

Model 524V / 524S

Panel Design: 2″ thick roll formed stucco embossed steel
Steel Gauge: 24 gauge (.022″ min) ribbed steel sections
Joint Design: Tongue and groove
Thickness /Insulation 1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover (524V)

1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover (524S)

Thermal Conductivity R-Value 6.6*
Paint System: 3-stage paint process delivers maintenance free finish that resists rust perforation
Colors Pre-painted white, brown, tan or gray
Limited Warranty: 10-year paint /one-year material & workmanship

Model 525V / 525S

Panel Design: 2″ thick roll formed smooth steel with combination of deep minor ribs
Steel Gauge: 25 gauge (.019″ min)
Joint Design: Tongue and groove
Thickness /Insulation 1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover (525V)

1-3/8″ thick polystyrene insulation with pre-painted 30 gauge steel backcover (525S)

Thermal Conductivity: R-Value 6.6*
Paint System: 3-stage paint process delivers maintenance free finish that resists rust perforation
Colors: Pre-painted white or brown
Limited Warranty: 10-year paint / one-year material & workmanship

Model – 664

Panel Design: 1 7/8″ thick roll formed steel
Steel Gauge: 24 gauge (.22″ min) raised panel door
Joint Design: Tongue and groove
Thickness & Insulation No insulation
Hardware: 14 gauge hinges, commerical 10-ball steel rollers, 10,000 cycle torsion springs
Colors: Pre-painted snowmist white, chocolate, brown, almond, sandstone, or desert tan.
Limited Warranty: 10-year finish against rust through / one-year material & workmanship

Model 664V

Panel Design: 1-7/8″ thick woodgrain embossed raised panel steel
Steel Gauge: 24 gauge (.022″ min) ribbed steel sections
Joint Design: Tongue-and-groove
Thickness /Insulation 1-3/8″ thick polystyrene insulation with polyethylene vinyl backcover
Thermal Conductivity R-Value 6.3*
Paint System 3-stage paint process delivers maintenance free finish that resists rust perforation
Colors Pre-painted white, brown, tan or gray; Trinar white or beige
Limited Warranty: 10-year paint / one-year material & workmanship

*Calculated garage door section R-value is in accordance with DASMA TDS-163.

Non-Insulated Commercial Garage Doors

Industrial Series doors feature a variety of standard ribbed, flush and embossed patterns such as stucco and woodgrain. Available in a wide selection of gauges for pro-grade durability, this series is a great choice for high-traffic applications including warehouses, distribution centers and loading docks.

If you need a new industrial door for your Florida-based business but don’t have the temperature-sensitive inventory that might require an insulated door, Banko Overhead Doors has a wide selection of high-quality commercial doors for you to choose from. We are proud to offer Clopay® doors, the leading name in overhead door supply, with rolling steel doorsfire doors, roll-up sheet doors, aluminum and glass full-view doors and sectional ribbed steel doors to meet your particular business needs.

Benefits of a Non-Insulated Overhead Door for Your Facility

If you haven’t considered a new, non-insulated door for your warehouse, shipping dock, gas station, restaurant or other commercial enterprise, here are a few reasons to consider installing one:

1. Appearance

The Clopay commercial non-insulated doors  come in a variety of options and styles to match your existing property. If your overhead door is in the front of your business where customers will see it, the benefits of this are obvious, but even if your commercial door will not be customer-facing, it can be very important.

Workers, vendors and even potential business partners may see your warehouse or other commercial property, and a door that is unsightly or in ill-repair can leave a lasting impression that can affect your business relationships. In contrast, an attractive, smoothly functioning door can project an atmosphere of professionalism that can greatly benefit your business.

2. Security

Your commercial overhead door represents access control to your facility. A door that is easily breached is one that may allow thieves and vandals to enter your property and do untold amounts of damage to your inventory and belongings. A solid, reliable door protects your inventory when you’re not around and keeps your employees safe when working, allowing only those people you want to enter and exit with ease.

3. Safety

A faulty door can be extremely costly to a business. A door that gets stuck halfway up presents a tremendous hazard to your people and property. We thoroughly inspect and install doors with a reputation for reliability and workmanship, so you don’t have to worry about safety issues.

Of course, a great door is only as good as it’s installation. In Tampa or the surrounding area, Banko Overhead Doors has installed thousands of high-quality doors quickly and professionally. For an estimate on your new commercial non-insulated door, contact us today.

Models CAD BIM Shop Drawing Specification Literature(PDF) Instruction Manual(PDF) Warranty
20-Gauge
Model 520 Ribbed, 20 gauge rfa pdfdxfdwg docrtfpdf Sustainable Upgrade Installation ManualSupplemental Installation pdf
24-Gauge
Model 524 Ribbed, 24 gauge rfa dwgdxfpdf docpdfrtf 524 BrochureSustainable Upgrade Installation ManualSupplemental Installation pdf
Model 664 Raised Panel, 24 gauge pdfdwgdxf rtfpdfdoc 664, 664V Brochure Installation ManualSupplemental Installation pdf
Raised Panel Vinyl Backed Model 664V pdfdwgdxf docrtfpdf 664V Brochure Installation ManualSupplemental Installation pdf
Ribbed Steel Backed Model 520S rfa dxfdwgpdf docrtfpdf Installation ManualSupplemental Installation pdf
Ribbed Steel Backed Model 524S rfa pdfdwgdxf docrtfpdf 524, 524V, 524S Brochure Installation ManualSupplemental Installation pdf
Ribbed Vinyl Backed Model 524V rfa pdfdwgdxf docrtfpdf Installation ManualSupplemental Installation pdf
25-Gauge
Model 525 Ribbed, 25 gauge rfa dwgdxfpdf docrtfpdf 525 Brochure Installation ManualSupplemental Installation pdf
Ribbed Steel Backed Model 525S rfa dwgdxfpdf docrtfpdf 525S Brochure Installation ManualSupplemental Installation pdf
Ribbed Vinyl Backed Model 525V rfa dwgdxfpdf rtfdocpdf 525, 525V, 525S Brochure Installation ManualSupplemental Installation pdf

Click on appropriate icon to download
To use the Spec Wizard,click here

(What is Spec Wizard?)

Track and Jamb Drawings

dwg dxf pdf
Standard Track dwg dxf pdf
Standard Track Follow the Roof Track dwg dxf pdf
Low Headroom–Rear Mount Track dwg dxf pdf
Low Headroom–Front Mount Track dwg dxf pdf
High Lift Track dwg dxf pdf
High Lift Follow-the-Roof Track dwg dxf pdf
Vertical Track dwg dxf pdf
Jamb Details dwg dxf pdf

 Commercial Hardware

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.

  • 14 gauge hinges
  • Commercial 10 ball steel rollers with options for nylon tire rollers
  • 10,000 cycle torsion springs
  • Steel step plate and lift handle for easy operation
  • Inside slide lock for increase security
  • 19 gauge steel hinge support plates
  • 18-gauge single end stiles; 16-gauge double end stiles
  • Galvanized aircraft cables with 7:1 safety factory
  • 2” or 3” track in a variety of configurations to meet building design requirements

Commercial Track Applications

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay® track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options. Learn more

Commercial Torsion Springs

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. Click here for details

Share this product:

Servicing 100’s of Cities

view all of our service areas

Banko Overhead doors

5416 West Sligh Ave., Suite 101
Tampa, Florida 33634

877.902.2656

NEAREST Service Area

Manatee/Sarasota

941.756.7424

Request an Estimate













    Your privacy is important to us. Your information is protected.

    View Our Privacy Policy

    Your ideal commercial garage door is waiting.


    Contact Us Today
    Get an Estimate Schedule a Repair